Kitchen Cabinetry

Here is a sample of our custom kitchen design, build, and installations. Thanks you for looking.

Cherry Kitchen Project

This kitchen project was a Shaker style, frame and flat panel kitchen design. The cabinet carcases and built-in pull out units was made from 3/4” Maple veneer core plywood. Cherry plywood panels was used for doors panels. Solid cherry was used for all door rail and stile, drawer fronts, and floor kick plate.

Drawer and door slider and hinge hardware is from BLUM. The drawer sliders and door hinges are fitted with BLUMOTION. Door and drawer pulls are brushed aluminum from Lee Valley.

The cabinetry was hand finished in cherry and was top coated with several coats of wipe-on poly.

Cherry Kitchen Project

This kitchen project was a Shaker style, frame and flat panel kitchen design. The cabinet carcases and built-in pull out units was made from Maple veneer core plywood. Some of the cabinet doors for the upper cabinets have solid Cherry wood mullions with one piece sculptured glass panel insert in each door. The remaining cabinet doors are a frame and panel construction with Cherry plywood inserts. Solid cherry was used for all door rail and stile, drawer fronts, and floor kick plate.

Drawer and door slider and hinge hardware is from BLUM. The drawer sliders and door hinges are fitted with BLUMOTION. Door and drawer pulls are brushed aluminum from Lee Valley.

The cabinetry was hand finished in cherry and was top coated with several coats of wipe-on poly.

Maple Kitchen Project

This kitchen project is a combination solid door and drawer and frame and panel design. One of the main criteria of this design was to match a built-in glass door wall cabinet in the clients’ dining room.

The cabinet carcases are made from 3/4” Maple veneer core plywood. The solid and rail and stile doors and drawer fronts are made from solid White Canadian Hard Maple.

Frosted glass panels were used in some cabinets to accent the overall look.

The drawer slides and hinges are from Blum. A Blum door lift system was used in a cabinet that housed a microwave. An eight drawer dish cabinet, that is located at the end of the series of lower cabinet where the overhang of soap stone, Blum’s Tip-on drawer release system was installed to eliminate the need for drawer pulls. All door hinges and most drawer sliders were equipped with BLUMOTION. The tall wall cabinet,to the far left of the photo beside the double oven, is fitted with a 7 basket full height pantry pull out unit. The baskets can be placed in various positions in the unit and the unit has a soft close mechanism. The pantry unit was purchased from Cabinetmart in London, Ont.

Door and drawer pulls are brushed aluminum from Lee Valley.

The cabinet finish was a sprayed on Honey tone Amber dye and was top coated with several coats of wipe-on poly.